Isolation and identification of a ferulic acid dehydrotrimer from saponified maize bran insoluble fiber

Following saponification of maize bran insoluble fiber a ferulic acid dehydrotrimer was isolated using Sephadex LH-20 chromatography. Structural identification was carried out using UV-spectroscopy, mass spectrometry and 1D and 2D NMR experiments ( ¹H, ¹³C, DEPT, COSY, TOCSY, ¹³C- ¹H HSQC, HMBC). UV-spectroscopy indicated characteristics of ferulate structures, mass spectrometry showed a trimeric ferulate structure, and the NMR spectra provided diagnostic evidence for its being a 5-5/8-O-4-coupled dehydrotrimer. Ferulic acid dehydrodimers are mainly derived from diferulates which cross-link polysaccharides. Because of the involvement of a 5-5-dehydrodiferulic acid unit in the identified trimer, this novel dehydrotriferulic acid from cereal grain fiber need not imply the cross-linking of three polysaccharide chains; molecular modeling of the ferulate dehydrodimerization in earlier studies showed that the 5-5-diferulate, uniquely, can form intramolecularly. This first identified ferulic acid dehydrotrimer nevertheless reveals that polysaccharide chains can be more extensively cross-linked than previously recognized.     

Determination of the percentage of wood failure by 3D scanning of the adhesive bondline

The quality of the wood-adhesive bond is usually determined by its shear strength and the percentage of wood failure, the latter usually being determined by visual evaluation and prone to the examiner’s subjective evaluation. A new technique of 3D scanning was used to evaluate the percentage of wood failure, and the results obtained were compared to those obtained by means of existing methods, i.e. the visual evaluation and image analysis techniques. Evaluation by 3D scanning showed comparable values for samples with a high percentage of wood failure, but large differences in the case of samples showing mainly adhesive failure.     

Purification and characterization of natural Bet v 1 from birch pollen and related allergens from carrot and celery

Birch pollen allergy is predominantly caused by the major allergen Bet v 1 and can lead to crossreactions with homologous proteins in food. Two major cross-reactive food allergens are Dau c 1 from carrot and Api g 1 from celery, which have never been purified from their natural source. Here, we describe a non-denaturing purification method for obtaining natural Bet v 1, Dau c 1 and Api g 1, comprising of ammonium sulfate precipitation, hydrophobic interaction chromatography and size exclusion chromatography. This method resulted in 98-99% pure isoform mixtures for each allergen. Characterization of these isoform mixtures with Q-TOF MS/MS clearly showed earlier reported isoforms of Bet v 1, Dau c 1 and Api g 1, but also new isoforms. The presence of secondary structure in the three purified allergens was demonstrated via circular dichroism and showed high similarity. The immune reactivity of the natural allergens was compared with recombinant proteins by Western blot and ELISA and showed similar reactivity.     

Consolidation and mechanical properties of reactive nanocomposite powders

Reactive nanocomposite powders with bulk compositions of 8Al·MoO₃, 12Al·MoO₃, and 8Al·3CuO were prepared by arrested reactive milling (ARM) and consolidated into cylindrical and rectangular pellets using a uniaxial die. Pellets were pressed at room temperature without any binder. Reference pellets were prepared from conventional Al powder and from Al-metal oxide powder blends with bulk compositions identical to those of the nanocomposite powders. Materials could be consolidated to densities greater than 90% of the theoretical maximum density while maintaining their high reactivity. Tensile strength and flexural strength of the consolidated materials were measured using diametrical compression and three-point flexural strength tests, respectively. Higher strengths were observed for higher relative densities, and the strength of the composite materials was comparable to that of consolidated aluminum powders. Yield strength of the reactive nanocomposite powders was determined from compaction load vs. die displacement curves using the Heckel equation. It was greater for the nanocomposite powders as compared to the powder blends or pure aluminum. Organic, or low melting point metal binders were added to selected samples to improve strength. Respective pellets were pressed at temperatures above the melting point of the metal binder. The highest density (~ 2.9 g/cm³) and tensile strength (~ 17.5 MPa) was observed with indium as binder. All consolidated samples were found to be highly reactive, and the effect of partial reaction during consolidation remained below the limit quantifiable by differential scanning calorimetry.     

Adhesive bonding of 3D-printed ABS parts and wood

Additive manufacturing, also known as 3D printing technology, has experienced massive growth in the last decade. Instead of printing the entire product, 3D printing can be used to produce only the most complex parts, which are then combined with simple, non-printed parts from other materials to make the final product. In addition to mechanical connections, adhesive bonding is most commonly used to combine printed parts with other elements. In this study, the influence of 3D-printing parameters on the bond shear strength of 3D-printed Acrylonitrile-butadiene-styrene copolymer parts bonded to beech wood was investigated. Three printing settings with different layer thicknesses (0.39, 0.19, 0.09 mm) and a posttreatment method that utilized acetone vapour were used. The three different adhesives applied were commercial one-component polyurethane adhesive, hot melt adhesive for edge bonding, and a two-component polyurethane adhesive. The results show that the type of adhesive had the biggest influence on the strength of the bond. The highest bond strength was achieved using a two-component polyurethane adhesive. The type of failure (failure in wood, plastic, adhesive, or cohesive failure) depended greatly on the type of adhesive and thickness of the printed layer.     

Characterization of hello message exchange to estimate sensor node's neighborhood residual energy distribution in initialization phase

The paper characterizes the hello message exchange (HME) procedure for a sensor node to develop its neighborhood residual energy distribution in the initialization phase of a static wireless sensor network. Because of the lack of coordination on channel access in the initialization phase, hello messages from multiple nodes face a high risk of data collision in the exchange course. A discovery ratio is hereby defined to measure the sufficiency of the HME procedure. The discovery ratio is related to the precision of the parameter estimates for the probability density function of a node's neighborhood residual energy distribution. To achieve an arbitrarily high discovery ratio within a resolvable time interval, the HME procedure is implemented using Birthday protocol, which results in large node energy consumption. To overcome this flaw, a method termed carrier sensing mini‐slot algorithm is proposed to carry out the HME procedure. The time duration and the node energy consumption for the HME procedures based on the Birthday protocol and the carrier sensing mini‐slot algorithm, respectively, are theoretically analyzed and verified by simulations. Copyright © 2011 John Wiley & Sons, Ltd.     

Investigation on thermal radiation spectra of coal ash deposits

This paper deals with thermal radiation properties of ash deposits on a pulverized coal boiler of an electric power plant. Normal emittance spectra in the 2.5–25 μm interval, and total normal emittance, were measured on 4 kinds of ash layers of a mm magnitude order thickness, at 560 → 1460 → 560 K in heating and cooling. It was found that ash powder layers are opaque for infrared radiation. The emittance increases with ash radiation wavelength and temperature. Ash powder is sintered and fused above 1200 K. The emittance of the sintered layer is above that of the unsintered layer. The authors propose, and explain by an example, correlating the experimentally obtained emittance spectra of ash deposits with a continuous curve, the formula of which defines the dependence of emittance on wavelength and temperature, i.e. ε = ε(λ,Т). Use of this formula, with parameter values determined by the proposed methodology, may greatly simplify the practical application of the experimentally determined emittances in the thermal design of existing and new steam boiler furnaces.     

Effect of substrate roughness on the contact damage of thin brittle films on brittle substrates

The effect of substrate and surface roughness on the contact fracture of diamond-like carbon coatings on brittle soda-lime glass substrates has been investigated. The average surface roughness (R_a) of the examined samples ranged from 15 nm to 571 nm. Contact damage was simulated by means of spherical nanoindentation, and fracture was subsequently assessed by focused ion beam microscopy. It was found that, in the absence of sub-surface damage in the substrate, fracture occurs in the coating in the form of radial, and ring/cone cracks during loading, and lateral cracks during unloading. Increasing the surface roughness results in a decrease in the critical load for crack initiation during loading, and in the suppression of fracture modes during unloading from high loads. When sub-surface damage (lateral cracks) is present in the substrate, severe spalling takes place during loading, causing a large discontinuity in the load-displacement curve. The results have implications concerning the design of damage-tolerant coated systems consisting of a brittle film on a brittle substrate.